Windows Hack using Remote Desktop Connection

Posted: December 16, 2015 in hacking, networking, win tricks

Windows Hack using Remote Desktop ConnectionRemote Desktop is a feature of Windows Server 2003 that lets you remotely log on to and work at a machine as if you were seated at the local console (in Windows 2000 Advanced Server, this feature was called Terminal Services in Remote Administration Mode). Remote Desktop can be a lifesaver for fixing problems on servers at remote sites. Below is a step by step guide for Windows Hack using Remote Desktop Connection

Step 1: Enable RDP Server on a One System

First, we need a system with RDP enabled. If you are using this in your lab, enable one Windows machine’s RDP server. Go to Control Panel thenSystem and Security. Below the System section, you will see “Allow remote access”. Click there.

Next, click on the “Allow Remote Assistance connections to this computer” and click “Apply.”

You should have Cain and Abel installed on your attack system. I have it on my Windows 7 system that I will be using to attack RDP on another Windows 7 system. In this case, we will not be using BackTrack as Cain and Abel is one of the few hacking tools developed originally for Windows and has never been ported to Linux.

Cain and Abel, besides being a great password cracking tool (albeit a bit slow) is probably the best MiTM tool on the market—and it is free!

Step 3: Use ARP Scan on Systems with Cain

Now that we have Cain and Abel running on our attack system and RDP server enabled on another, we need to do an ARP scan. In this way, we will find all the systems on the network by sending out ARP requests and the systems on the network will respond with their IP address and MAC addresses. Choose a range that is appropriate for your target network.

Next, now that know all the machines, IP addresses and MAC addresses on the network from the ARP scan, we are in a position to be able to poison the ARP. We poison the ARP so that our attack system sits between the RDP server and the RDP client. In this way, all of either machine’s traffic must travel through our attack machine.

Click on the Sniffer button on Cain, then select the Sniffer tab, then select theHosts tab at the bottom, then click on the blue + on the top menu, select theRadio button, select the target IP range, and click OK.

Here, we see the hosts on the network.

Now, we wait for the RDP client to connect to the RDP server. This is likely to happen when an individual calls tech support and tech support needs to configure and demonstrate something on their machine. As you might guess, this requires some patience. When they do, we can then intercept its traffic.

Below, we are connecting to the RDP server called Null Byte.

With our Cain and Abel MiTM attack in place, all of the traffic between the RDP server and the RDP client will pass through our attack system.

Cain and Abel is now capturing the entire session and saving it into a file named in the far right column. We can now right click on that filename and choose View to open the decrypted file in Notepad.

Step 8: Search for Traffic

Now that all the traffic on the RDP connect is traveling through our attack system, we can search for traffic of interest to us.

Ideally, we want the sysadmin password for RDP. If we can find the sysadmin password for RDP, we will likely be able to use RDP on any of the network’s machines as usually the sysadmin will set up RDP with the same password on every system for convenience.

Even better, many sysadmin use the same password to remote into client machines as they use on their system and other accounts. This means that when we capture this password we may own the entire domain and network!

To find any keys pressed in the hexadecimal file capture, use the Find feature in Notepad to search for “key pressed”. This will find each of the keystrokes, one-by-one, of any keystrokes entered by the sysadmin including their password.

Hope you like this article of Windows Hack using Remote Desktop Connection.

Posted by Shubham ;)

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s